Datasheet

AS4C16M32MD1
Confidential 39 Rev. 1.0/July 2014
Input A10 determines whether one or all banks are to be precharged. In case where only one bank is to be
precharged, inputs BA0, BA1 select the bank. Otherwise BA0, BA1 are treated as “Don’t Care”.
Once a bank has been precharged, it is in the idle state and must be activated prior to any READ or WRITE
command being issued. A PRECHARGE command will be treated as a NOP if there is no open row in that bank,
or if the previously open row is already in the process of precharging.