Specifications

Maintenance

F232086

Monthly Preventive Maintenance Checklist

Machine ________________________

Operator _______________________

Month

Checks

Observe All Safety Warnings!

Disconnect power to the washer-extractor before performing the

monthly maintenance procedures.

1. Each month OR after every 200 hours of operation,

lubricate bearings.

2. Determine if V-belts require replacement or adjustment:

a. Check V-belts for uneven wear and frayed edges.

b. Verify that V-belts are properly tensioned.

c. Verify that V-belts are properly aligned.

3. Remove back panel and check hoses for leaks.

4. Unlock the hinged lid and check supply dispenser hoses and connections.

5. Clean inlet hose filter screens. Replace if worn or damaged.

6. Tighten motor mounting bolt locknuts and bearing bolt locknuts, if necessary.

7. Use compressed air to clean lint from motor.

8. Clean interior of washer-extractor, both basket and shell, by wiping with a

water-soaked sponge or cloth.

9. Use compressed air to clean moisture and dust from all electrical components.

10.

11.

12.

13.

14.