Specifications

Maintenance

F232086

Daily Preventive Maintenance Checklist

Machine ____________________________

Operator ___________________________

Week Of: ________________

Days

Checks 1234567

Observe All Safety Warnings!

Beginning of Day

1. Inspect water inlet valve hose connections on the back of the washer-

extractor for leaks.

2. Inspect steam hose connections for leaks (where applicable).

3. Verify that insulation is intact on all external wires and that all

connections are secure.

4. Check door lock and interlock before starting operation:

a. Attempt to start the washer with door open.

b. Close the door without locking it and attempt to start the washer.

c. Close and lock the door, start a cycle, and attempt to open the door

while the cycle is in progress.

End of Day

1. Clean the door gasket of all foreign matter.

2. Clean automatic supply dispenser and lid.

3. Clean the washer’s top, front, and side panels.

4. Leave loading door open at the end of each day to allow moisture to

evaporate.

NOTE: Unload the washer-extractor promptly after each completed cycle to prevent moisture buildup.

NOTE: Leave loading door open after each completed cycle to allow moisture to evaporate.