Specifications

Maintenance

F232086

Quarterly

NOTE: Disconnect power to the washer-extractor

before performing the quarterly maintenance

procedures.

1. Tighten door hinges and fasteners, if necessary.

2. Tighten anchor bolts, if necessary.

3. Verify that the drain motor shield is in place and

secure.

4. Check all painted surfaces for bare metal.

(Matching gray paint is available from the

manufacturer.)

● If bare metal is showing, paint with primer or

solvent-based paint.

● If rust appears, remove it with sandpaper or

by chemical means.

Then paint with primer or solvent-based paint.

5. Clean steam filter, where applicable.

a. Turn off steam supply and allow time for the

valve to cool.

b. Unscrew nut.

c. Remove element and clean.

d. Replace element and nut.