Specifications

Maintenance
F232086
38
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
c. Verify that V-belts are properly aligned by
checking pulley alignment. Place a
straightedge across both pulley faces. The
straightedge should make contact with the
pulleys in four places. See Figure 21.
3. Remove back panel and check overflow hose and
drain hose for leaks.
Figure 20
Figure 21
4. Unlock the hinged lid and check the supply
dispenser hoses and hose connections.
5. Clean inlet hose filter screens:
a. Turn water off and allow valve to cool, if
necessary.
b. Unscrew inlet hose and remove filter screen.
c. Clean with soapy water and reinstall. Replace
if worn or damaged.
6. Remove back panel and check overflow hose and
drain hose for leaks.
7. Tighten motor mounting bolt locknuts and
bearing bolt locknuts, if necessary.
8. Use compressed air to clean lint from motor.
9. Clean interior of washer-extractor, both basket
and shell, by wiping with a water-soaked sponge
or cloth.
10. Use compressed air to ensure that all electrical
components are free of moisture and dust.
PHM676N
1 Deflection
2 Span Length
PHM677N
1 Drive Motor
2 Drive Pulley
3 Belt
4 Straightedge
5 Driven Pulley
PHM676N
1
2
1
2
3
4
5