Operating instructions

Maintenance

F8138701

Monthly Preventive Maintenance

Checklist

Machine ____________________________

Operator ___________________________

Month

Checks

Observe All Safety Warnings!

Disconnect power to the machine before performing the monthly maintenance procedures.

1. Each month OR every 200 hours of operation, lubricate bearings.

2. Clean the AC drive fins (where applicable).

3. Determine if V-belts require replacement or adjustment:

a. Check V-belts for uneven wear and frayed edges.

b. Verify that V-belts are properly tensioned.

c. Verify that V-belts are properly aligned.

4. Remove back panel and check hoses for leaks.

5. Check supply dispenser hoses and connections (where applicable).

6. Clean inlet hose filter screens. Replace if worn or damaged.

7. Tighten motor mounting bolt locknuts and bearing bolt locknuts, if necessary.

8. Use compressed air to clean lint from motor.

9. Clean interior of washer-extractor, both basket and shell, by wiping with a water-

soaked sponge or cloth.

10. Use compressed air to clean moisture and dust from all electrical components.

11. Remove chemical supply components (where applicable) and check for residual

chemicals. Clean as necessary and replace.

12.

13.

14.