Installation manual

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Global Setup
41
F8138801
Water Management Menu
The Water Management Menu allows the user to set
the water reuse and water recirculation options to Yes
or No. If water reuse option is turned off, the Reuse
Fill Menu will not be displayed during programming
of a Segment. Press the and keypads to
move the highlighted box through the two different
items in the Water Management Menu. Press the
or keypad to change selections to “Yes” or
“No”.
Press the or keypad to jump to the Save
Changes Menu. Use or to move
highlighted box to “Yes” or “No”.
Press the keypad to return to Global Setup
Menu. If no changes were made, press or
keypad to return to Global Setup menu.
The user can set the External Dispenser Pause On or
Off. The control default for this option is “Off”. If
programmed on, the control will wait with a normally
open contact for contact closure to indicate the need
for a pause in cycle operation.
Alarms Program Menu
The Alarms Program Menu is used to set the fill, drain,
and heat alarm times.
The and keypads are used to move the
highlighted box through the different items in the
Alarm Program Menu. Once the item is highlighted,
the value can be changed by using the and
keypads. Pressing the or keypad will
jump to the Save Changes Menu. Use or
to move highlighted box to “Yes” or “No”. Press
the keypad to return to Global Setup menu. If no
changes were made, press the or keypad
to return to Global Setup Menu.
PHM1043R
Figure 46
Water Mgmt
No
Does the Machine Have
Water Reuse Installed?
No
Does the Machine Have
Water Recirc Installed?
Off
External Dispenser Pause
PHM1044R
Figure 47
Alarms
mm
Fill
5
ss
hmm
00:
Drain
2 00:
Heat
1 30: