Specifications

Start Up

Basket Rotation

After installation is complete, run the machine through a test cy-

cle and check that basket rotation is counter clockwise in the ex-

tract step.

1. If rotation is not counter clockwise, disconnect power to ma-

chine.

2. Have a qualified electrician reverse any two motor leads at

the motor.

Safety Stability Switch Operation

After machine is properly installed, the safety Stability Switch

operation must be verified.

1. Locate the green-colored switch on the rear, left-side of the

frame.

2. Place a large magnet above the normally-closed ball switch to

verify switch operation.

IMPORTANT: Machines are manufactured with a

normally-closed ball switch and should not require

any adjustment. To avoid nuisance tripping, ma-

chine must be level with a summed value of 3/8 inch

(9.5 mm) front to back and right to left to the earth. If

switch is tripped, check if machine is level and then

for poor grouting and broken anchor bolts. DO NOT

BYPASS SAFETY SWITCH. Contact a qualified serv-

ice technician for further assistance.

Start Up

F8410701ENR10