Specifications

PHM954N_SVG

Figure 32

5. If equiped with an optional supply dispenser, add dry supplies

to the compartment cups prior to the start of each cycle.

Liquid supplies can be injected directly into the supply dispenser

by an external chemical supply system.

NOTE: Supply dispenser compartment cups must

not be removed when an external chemical injection

supply system is attached to the machine.

Press

or keypads to select desired wash cycle.

Press to start the selected cycle.

PHM1423C_SVG1

Figure 33

As the cycle proceeds, the display will show a summary of the

cycle occurring.

To begin the cycle at any step other than the first step, press the

keypad to advance through the cycle to the desired starting

point. Refer to Programming Manual for information to disable

Rapid Advance.

If the door is open, the display will indicate that the door needs to

be closed. Refer to Figure 34 .

PHM843N_SVG

Figure 34

Close door to start cycle or press keypad to return to Cy-

cle Menu. The cycle will continue until its completion. Then

the display will show the door is ready to be opened.

NOTE: Since the machine MUST drain and balance

during the drain step before it can extract, the con-

trol will only Rapid Advance to a drain step that oc-

curs before an extract or spray rinse extract step.

9. Emergency stop button (refer to Figure 35 ) should be de-

pressed to terminate machine operation when any unsafe con-

dition is present during machine operation.

a. Press red emergency stop button to stop all action.

b. To restart machine, pull red emergency stop button out

and press START keypad.

NOTE: Activation of the emergency stop button

stops all machine control circuit functions, but

DOES NOT remove all electrical power from ma-

chine.

PHM947N_SVG

1. Emergency Stop Button

Figure 35

Operation

F8410701ENR10