Specifications

PHM823N_SVG

= Power

= Neutral

1. External Supply Power Output

2. Red Jumper Wire

3. External Supply Input Signal Common

4. VAC Power Terminal

5. VAC RETURN Terminal

Figure 26

CAUTION

Do not attempt to increase fuse rating or alter wiring

of external chemical supply terminal strip in such as

way that may conflict with the suggested methods

provided on the Optional External Supply Wiring Dia-

gram.

W699

External Supply Signals

Wash-cycle signals are provided to the external chemical supply

equipment and a “wait for the next step” signal can be received

from the supply equipment.

For example, if ES1 is selected the K1 contact will close and

power will be supplied to Supply 1 Signal. The contact will re-

main closed for the amount of time programmed in control. Refer

to Figure 27 for Internal Supply Connection or Figure 28 for Ex-

ternal AC Connection.

PHM822N_SVG

= Power

= Neutral

1. ES1 Power supply

2. K1 Contact

3. Supply 1 Signal

Figure 27

Specifications and Dimensions