Specifications

Mounting Bolt Hole Locations - 45 and

65 Pound Models

NOTE: For single machine installations or two ma-

chines installed back to back, use the outside bolt

holes marked “A”. For multiple machines installed side

by side with minimum clearance, use the inside bolt

holes marked “B”.

Refer to Table 3 .

45 and 65 Pound Models

PHM960N_SVG

BA AB

1. Front of Machine (45)

2. Front of Machine (65)

Figure 4

Machine Capacity Dimensions, in. [mm] - 45 and 65 Pound Models

45 65

A 34.12 [867] 34.12 [867]

Specifications and Dimensions

F8410701ENR10