Specifications

On UniLinc models, serial plate information is also programmed
into the control. To access machine ID through the control:
1.
Press and hold , then , then keypads at the same
time.
2.
Press the keypad until Diagnostic is highlighted.
3.
Press the
keypad.
4.
Press the keypad until machine ID is highlighted.
5.
Press the
keypad.
Model Example of Serial Plate Location - UniLinc
PHM3254P_SVG
2
1
2
1. In control
2. At back of machine
Figure 2
Replacement Parts
If literature or replacement parts are required, contact the source
from which the machine was purchased or contact Alliance Laun-
dry Systems at [phone] for the name and address of
the nearest authorized parts distributor.
Customer Service
For technical assistance, contact your local distributor or contact:
Alliance Laundry Systems
Shepard Street
P.O. Box 990
Ripon, WI 54971-0990
U.S.A.
www.alliancelaundry.com
Phone: [phone] Ripon, Wisconsin
Alliance International: [phone] Wevelgem, Belgium
Introduction
10
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT F8410701ENR10