Specifications

Installation
25
801509
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 24
D434I
1 New Stainless Steel Flexible Connector –
Use only if allowed by local codes
(Use Design AGA Certified Connector)
4 Black Iron Pipe
Shorter than 6.1 m (20 ft.) – Use 0.375 in. pipe
Longer than 6.1 m (20 ft.) – Use 0.5 in. pipe
2 0.125 in. NPT Pipe Plug
(For checking inlet gas pressure)
5 0.375 in. NPT Gas Connection
3 Equipment Shut-Off Valve – Installed within
1.8 m (6 ft.) of dryer
1
5
4
2
3