Specifications

Installation

801509

Step 8: Wipe Out Inside of Washer Drum

and Dryer Drum

Before using the washer and dryer for the first time,

use an all-purpose cleaner, or a detergent and water

solution, and a damp cloth to remove shipping dust

from inside the drums.

Figure 15

Figure 16

Step 9: Plug In the Unit

Refer to sections on Electrical Requirements and

connect the unit to an electrical power source.

Figure 17

Figure 18

Step 10: Check Installation

Refer to Installer Checklist on the back cover and

make sure that unit is installed correctly.

SWD695N

SWD603N

D373I

1 Power Cord (Four-Wire)

D254I

ELECTRIC UNIT

Connect to 40 Amp circuit.

D254I

GAS UNIT

Plug cord into separately fused 20 Amp circuit.