Specifications

Installation
13
801509
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
In-the-Wall Installation
For installations of this type, the drain hose MUST be
secured to one of the inlet hoses using the beaded
tie-down strap from accessories bag.
NOTE: End of drain hose must not be below
60.96 cm (24 inches).
Figure 9
Laundry Tub Installation
For this type of installation, the drain hose MUST be
secured to the stationary tub to prevent hose from
dislodging during use. Use the beaded tie-down strap
(supplied in accessories bag) to secure hose.
Figure 10
H023I
1 Drain Hose
2 Tie-Down Strap (Tape if necessary)
3 Inlet Hoses
2
3
1
SWD617N
1 Drain Hose
2 Tie-Down Strap (Tape if necessary)
SWD655N
1
2