Specifications

Installation

801509

Standpipe Installation

Place the drain hose into the standpipe.

Remove the beaded tie-down strap from accessories

bag and place around standpipe and drain hose and

tighten strap to hold hose to standpipe. This will

prevent the drain hose from dislodging from drain

receptacle during use.

Figure 7

Sink Installation

For this type of installation, use the beaded tie-down

strap (supplied in accessories bag), or use a large wire

tie (available from your local hardware store) and

secure the drain hose to the cabinet top hinge (refer to

Figure 8). This will prevent the drain hose from

dislodging during use.

Figure 8

SWD615N

1 Drain Hose

2 Beaded Tie-Down Strap

3 Standpipe – 5.08 cm (2 in.) or 4 cm (1.5 in.)

SWD615N

61 TO 91.44 cm

(24 TO 36 in.)

RECOMMENDED

HEIGHT

SWD616N

1 Drain Hose

2 Tie-Down Strap (Wire tie or tape if necessary)

SWD616N