Specifications

Installation

801509

Figure 5

IMPORTANT: Hoses and other natural rubber

parts deteriorate after extended use. Hoses may

develop cracks, blisters or material wear from the

temperature and constant high pressure they are

subjected to.

All hoses should be checked on a yearly basis for

any visible signs of deterioration. Any hose showing

the signs of deterioration listed above should be

replaced immediately. All hoses should be replaced

every five years.

Step 3: Connect Drain Hose to Drain

Receptacle

Remove the drain hose from its shipping position on

the rear of the washer by unhooking the hose from the

retainer clamp or by removing the shipping tape.

Find the instructions, on the following pages, that are

appropriate for your type of drain receptacle

(standpipe, sink, wall, or laundry tub). Follow these

instructions to properly install the drain hose.

IMPORTANT: Drain receptacle must be capable of

handling a minimum of 3.2 cm (1.25 inch) outside

diameter drain hose.

Figure 6

SWD613N

1 Water Supply Faucets

2 Cold Water Connection

3 Hot Water Connection

4 Water Fill Hoses

SWD613N

WATER MIXING

VALVE

SWD614N

1 Retainer Clamp

SWD614N