Instruction manual

67
501506
Section XII
Rapid Advance Feature
The Rapid Advance feature allows the owner to
quickly reduce the amount of time remaining in an
active cycle or advance into a cycle from the “Ready”
mode.
How to Enter Rapid Advance Feature
1. Open and close the service door. Refer to
Section VI .
2. While pressing and holding the HIGH TEMP
pad with one hand, press the START pad with
the other hand.
3. Press the LOW TEMP pad and hold to rapidly
reduce the time remaining in a cycle.
How to Exit Rapid Advance Feature
1. With cycle in progress, advance the cycle until
the control reverts back to the “Ready” mode.
See Figure 3 .