Instruction manual

60
501506
To advance to the next number segment for
each option, press PERM PRESS:
One
Time
Two
Times
Three
Times
1 "CyC"
Thousand
000,
Hundreds
000
----------
2 "CnS"
Millions
000,
Thousand
000,
Hundreds
000
3 "HCC
Thousand
000,
Hundreds
000
----------
4 "rCC"
Thousand
000,
Hundreds
000
----------
5 "CCC
Thousand
000,
Hundreds
000
----------
6 "ACH
Thousand
000,
Hundreds
000
----------
7 "ACr"
Thousand
000,
Hundreds
000
----------
8 "ACC
Thousand
000,
Hundreds
000
----------
9 "COP
Thousand
000,
Hundreds
000
----------
10 "dOP"
Thousand
000,
Hundreds
000
----------
11 "PFL"
Hundreds
000
---------- ----------
12 "dnL"
Hundreds
000
---------- ----------
CHART 10
If, for example, the audit has counted 10,009 coins in
the Total Number of Coins “CnS” option, pressing the
START pad one time in step 2 will show
[000],010,009 = (no millions). Pressing the START
pad again will show 000,[010],000 = (ten thousand).
Pressing the START pad a third time will show
000,010,[009] = (nine). The total = 000,010,009 or
10,009. (See
Chart 10 for the audit range and
number of segments displayed for each audit option.)
3. Press the START (enter) pad again. The
control will revert back to the next audit option
in the Audit Options List.
4. To select other audit options, repeat steps 1–4.
How to Exit Audit Feature
1. Be sure service door has been opened and
closed. Refer to Section VI.
2. While pressing and holding the HIGH TEMP
pad with one hand, press the LOW TEMP pad
with the other hand. The VFD will revert back
to “Ready” mode. See
Figure 3 .