Instruction manual

13
501506
Signals
There are three options where a signal may sound
during the dryer operation. The owner may program
when the signals will sound and at what volume level.
These three options are listed below:
1. End of Cycle Signal
By default, this signal is turned off. If enabled,
the signal will sound for three seconds at one
of three programmable volume levels at the
end of a cycle.
2. Keypad Depression Signal
By default, this signal is set at the lowest
volume level and will sound for .25 seconds.
This signal will sound each time a successful
keypad depression has been executed.
3. Coin Drop Signal
By default, this signal is off. If enabled, the
signal will sound for .25 seconds at one of
three programmable volume levels each time a
coin is entered.
NOTE: Refer to Section VIII, option 1, to program
signal options.