Specifications

Maintenance
69
F8429301 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Care of Stainless Steel
Remove dirt and grease with detergent and water.
Thoroughly rinse and dry after washing.
Avoid contact with dissimilar metals to prevent
galvanic corrosion when salty or acidic solutions
are present.
Do not allow salty or acidic solutions to
evaporate and dry on stainless steel. Wipe clean
of any residues.
Rub in the direction of the polish lines or “grain”
of the stainless steel to avoid scratch marks when
using abrasive cleaners. Use stainless steel wool
or soft, non-metal bristle brushes. Do not use
ordinary steel wool or steel brushes.
If the stainless steel appears to be rusting, the
source of the rust may be an iron or steel part not
made of stainless steel, such as a nail or screw.
Remove discoloration or heat tint from
overheating by scouring with a powder or by
employing special chemical solutions.
Do not leave sterilizing solutions on stainless
steel equipment for prolonged periods of time.
When an external chemical supply is used,
ensure no siphoning of chemicals occurs when
the machine is not in use. Highly concentrated
chemicals can cause severe damage to stainless
steel and other components within the machine.
Damage of this kind is not covered by the
manufacturers warranty. Locate the pump and
tubing below the machines’s injection point to
prevent siphoning of chemicals into the machine.