Service manual

ManualsBrandsAlliance Laundry Systems ManualsDryerJE2870

52 53273

Section 6 Gas Burner Conversion Procedures

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the dryer(s) before servicing.

• Close gas shut-off valve to gas dryer(s) before servicing.

• Never start the dryer(s) with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the dryer is properly grounded.

W001R1

WARNING

66. CONVERSION KITS – For Dual Input Gas

Dryers Equipped with No. 56279 Gas Valve

All dual input gas dryers manufactured with glow

bar ignition are factory equipped for

Natural/Mixed gas operation.

No. 56975 Natural/Mixed to L.P. Gas Kit is

available from your parts supplier. This kit

consists of:

No. 56976 L.P. to Natural/Mixed Gas Kit is

available for field conversion. This kit consists of:

67. ORIFICE INFORMATION

1 - 53390 Block-Open Plug and Gasket

1 - 55753 “Valve Converted” Sticker

1 - 56426 L.P. Gas Sticker

1 - 56977 Burner Orifice - Inner

1 - 56978 Burner Orifice - Outer

1 - 56979 Change-Over Sticker

1 - 53952 Vent Screw

1 - 55493 Burner Orifice - Outer

1 - 54944 Burner Orifice - Inner

1 - 56427 Natural Gas Sticker

1 - 56980 Change-Over Sticker

1 - 56981 Valve Number Sticker

Burner Orifice

Kind of Gas

Outer

Orifice

Part No.

Inner

Orifice

Part No.

Stamp

Code

Natural/Mixed

55493 - 37T

- 55494 40

Liquefied

Petroleum (L.P.)

56978 - 53T

- 56977 53

Figure 45

DRY1222S