Service manual

48 53273
Section 5 Adjustments
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer(s) before servicing.
• Close gas shut-off valve to gas dryer(s) before servicing.
• Never start the dryer(s) with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001R1
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
f. Allow dryer to operate for approximately five
minutes. Observe burner flame and loosen air
shutter lockscrew. Refer to Figure 42.
g. Turn air shutter to the right or left to obtain a
soft, uniform blue flame with orange tips. (A
lazy, orange tipped flame indicates lack of air.
A harsh, roaring, very blue flame indicates too
much air.)
h. Tighten air shutter lockscrew securely. Refer to
Figure 42.
Figure 42
DRY845S
Air Shutter
Lockscrew
Air
Shutter