Service manual
800170 183
Section 5 Service Procedures
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer/dryer before servicing.
• Close gas shut-off valve to gas dryer before servicing.
• Never start the washer/dryer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer/dryer is properly grounded.
W014R1
WARNING
105. DRYER ACCESS PANEL
Refer to Figure 40.
a. While supporting access panel, remove two
screws from bottom edge of panel.
b. Gently lower access panel to disengage panel
locators from bottom edge of front panel.
c. Remove access panel.
Figure 40
Access
Panel
Panel
Attaching
Screws
D302SE3B










