Service manual

800170 13

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer/dryer before servicing.

• Close gas shut-off valve to gas dryer before servicing.

• Never start the washer/dryer with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer/dryer is properly grounded.

W014R1

WARNING

Section 3

Troubleshooting

1. TROUBLESHOOTING COIN DROP

When coin is placed into coin slot, the coin should roll

down drop and be heard dropping into coin vault. If

coin does not fall into coin vault or if coin drop sensor

does not register that coin has been entered, follow

troubleshooting instructions on following page. Refer

to Figure 1 for path that coin follows when working

properly.

IMPORTANT: Never use oil to correct coin drop

problems. Oil residue will prevent coins from

rolling properly.

IMPORTANT: Do not bend or damage mechanical

parts within coin drop.

Figure 1

DRY2B

Additional coins

following path to

sensor

Coin Drop

Sensor

Coin in

Coin Slot