Service manual

800170 123
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer/dryer before servicing.
• Close gas shut-off valve to gas dryer before servicing.
• Never start the washer/dryer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer/dryer is properly grounded.
W014R1
WARNING
Troubleshooting
NetMaster Models – Dryer Control
67. ERROR CODE LISTING
Display
Information
Description
Cause/
Corrective Action
EI:01 Transmission Failure Communication failure. Re-aim Micro-Wand and try again.
EI:02 Device Timeout Communication failure. Re-aim Micro-Wand and try again.
EI:03 Invalid Command Code Incorrect machine type. Before downloading, ensure data is
for current machine type.
EI:04 Expecting Upload Request Communication failure. Re-aim Micro-Wand and try again.
EI:05 Invalid or Out-of-Range Data Incorrect machine type. Before downloading, ensure data is
for current machine type.
EI:06 Invalid Data Code Incorrect machine type. Before downloading, ensure data is
for current machine type.
EI:07 Error Writing to RTC Control failure. Replace control.
EI:08 Error Writing to EEPROM Control failure. Replace control.
EI:09 CRC-16 Error Communication failure. Re-aim Micro-Wand and try again.
EI:0A Invalid Machine Type Incorrect machine type. Before downloading, ensure data is
for current machine type.
EI:0F Invalid Wakeup or Infra-red
Disabled
Communication failure or infra-red is disabled. Manually
enable infra-red on control or re-aim Micro-Wand and try
again.
EC:00 General Communication Error Communication failure. Try card again.
EC:02 Timeout Error Communication failure. Try card again.
EC:03 Invalid Command Code Incorrect machine type. Before downloading, ensure data is
for current machine type.
EC:05 Invalid or Out-of-Range Data Incorrect machine type. Before downloading, ensure data is
for current machine type.
EC:06 Invalid Data Code Incorrect machine type. Before downloading, ensure data is
for current machine type.
EC:09 Corrupted Data Error Communication error. Try card again.