Instruction manual

Programming NetMaster
91
511210
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Configuration #2 Programming
Use the table on the following page (Table 6) to turn on
or turn off access for OPL mode and TopOff and to
change Fahrenheit/Celsius, TopOff Vend/Card and
minutes/seconds.
NOTE: If manually programming, DO
NOT
program OPL mode “ON”. This feature cannot be
exited manually.
Minutes or Min/Sec This option determines if minutes or minutes and seconds will be displayed in the VFD.
MIN/SEC = Turns on the minutes and seconds display.
MIN = Turns on the minutes only display.
TopOff Enable/
Disable
This option determines whether the TopOff feature is turned on or off.
OFF = Turns off TopOff.
ON = Turns on TopOff.
TopOff Type This option determines the cards needed for the TopOff feature.
All Cards = Allows any card to use the TopOff feature.
One Card = Allows only the same card that started the cycle to use the TopOff feature.
Fahrenheit/Celcius This option determines whether the display will be shown in Fahrenheit or Celsius.
F = Displays temperatures in Fahrenheit.
C = Displays temperatures in Celsius.
OPL Mode This option determines whether the OPL Mode is turned on or off.
OFF = Turns off OPL Mode.
ON = Turns on OPL Mode.