Instruction manual

Programming NetMaster
511210
88
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Configuration #1 Programming
Use the table on the following page (Tabl e 5) to turn
on or turn off the preprogrammed daylight savings
option, infra-red access option, decimal point option,
and the manual access option in NetMaster.
To change any or all of these configuration options,
review the following descriptions carefully and choose
the appropriate configuration value from Table 5. Enter
the appropriate value in step 5 on the previous page.
Daylight Savings This option automatically sets the clock in NetMaster to account for the time change during
Daylight Savings.
OFF = Turns off the automatic daylight savings option programmed in NetMaster.
ON = Turns on the automatic daylight savings option programmed in NetMaster.
Infra-red Access This option determines if a Micro-Wand can access or program NetMaster.
OFF = Turns off the infra-red access by the Micro-Wand.
ON = Turns on the infra-red access by the Micro-Wand.
Decimal Point This option determines if a decimal point is used when displaying the vend price (i.e., machines
using token currency may choose to remove the decimal point).
OFF = Turns off the decimal point from appearing in the VFD.
ON = Turns on the decimal point to appear in the VFD.
Manual Access This option must be turned on to perform manual programming with the keypads. Manual access
can only be turned on or off with the Micro-Wand, Smart Card Reader, or Network Board.