Instruction manual

Programming NetMaster
51
511210
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
24. Special Vend A Coin #2 TopOff
Seconds “+024”
This option allows the owner to set the amount of
topoff time in seconds for the Special Vend A Coin #2
option.
How to Program Special Vend A
Coin #2 TopOff Seconds
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the LOW TEMP (+) or the NO HEAT (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 93
3. Press the LOW TEMP (+) or the NO HEAT (-)
keypad to scroll through the programmable
options until “+024” appears in the VFD. Refer
to Figure 94.
Figure 94
4. When “+024” appears in the VFD, press the
START (enter) keypad. The current number of
seconds set for Special Vend A Coin #2 TopOff
Seconds will appear in the VFD.
5. Press the LOW TEMP (+) or the NO HEAT (-)
keypad to increase or decrease the current
number of seconds displayed in the VFD to the
desired number of seconds. Refer to Figure 95.
NOTE: Special Vend A Coin #2 TopOff Seconds
can be set from zero (0) to 59 seconds.
Figure 95
6. Press the START (enter) keypad when the correct
number of seconds appears in the VFD. The next
option, “+025”, will appear in the VFD.
NOTE: To program “+025” (Special Vend A Auto-
Shutdown Enable), refer to option 25. To program
other options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the MED TEMP
keypad with one hand, press the LOW TEMP
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to Figure 2.
C762I
C788I
C848I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
C84
8
1
32