Instruction manual

Programming NetMaster

511210

18. Special Vend A No Heat Price

“+018”

This option allows the owner to set the vend price for a

no heat cycle in Special Vend A.

How to Program Special Vend A

No Heat Price

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the LOW TEMP (+) or the NO HEAT (-)

keypad until “PrOg” appears in the VFD. Press

the START (enter) keypad and “+001” will

appear in the VFD.

Figure 73

3. Press the LOW TEMP (+) or the NO HEAT (-)

keypad to scroll through the programmable

options until “+018” appears in the VFD. Refer

to Figure 74.

Figure 74

4. When “+018” appears in the VFD, press the

START (enter) keypad. There are five digits in

the Special Vend A No Heat Price. The fifth digit

will appear in the VFD and will flash one second

on and one second off. Refer to Figure 75.

NOTE: If vend price is $100.00 or more, the fifth

digit is “1”. If vend price is $99.99 or less, the fifth

digit is “0”.

Figure 75

5. Press the LOW TEMP (+) or the NO HEAT (-)

keypad to increase or decrease the value of the

fifth digit. Refer to Figure 76.

NOTE: The vend price can be set from 1 to 65,535.

Figure 76

C762I

C794I

C826I

C848I

1 Press this pad (+) to scroll forward or increase a value

2 Press this pad (enter) to choose a selected value or

option

3 Press this pad (-) to scroll back or decrease a value

C826I

C84