Instruction manual

Programming NetMaster
39
511210
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
7. Press the LOW TEMP (+) or the NO HEAT (-)
keypad to increase or decrease the value of the
active digit and the START (enter) keypad to
enter the value of the digit and advance to the
next digit.
8. Press the START (enter) keypad with the last
active digit. The next option, “+015”, will appear
in the VFD.
NOTE: To program “+015” (Special Vend A Heat
Price), refer to option 15. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the MED TEMP
keypad with one hand, press the LOW TEMP
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to Figure 2.