Instruction manual

Programming NetMaster
511210
38
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
14. Special Vend A Site Code #1
“+014”
This option allows the owner to program the machines
to accept site codes for Special Vend A that are
specific to select groups or individuals when using
cards. It also allows the owner to only give Special
Vend A pricing for a card with this site code. If Special
Vend A site code #1 is zero, then Special Vend A
pricing will apply to all cards.
How to Program the Special Vend A Site
Code #1
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the LOW TEMP (+) or the NO HEAT (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 57
3. Press the LOW TEMP (+) or the NO HEAT (-)
keypad to scroll through the programmable
options until “+014” appears in the VFD. Refer
to Figure 58.
Figure 58
4. When “+014” appears in the VFD, press the
START (enter) keypad. There are five digits in
the Special Vend A Site Code #1. The fifth digit
will appear in the VFD and will flash one second
on, one second off. Refer to Figure 59.
NOTE: If the site code is 10,000 or more, the fifth
digit is “1”. If the site code is 9,999 or less, the fifth
digit is “0”.
Figure 59
5. Press the LOW TEMP (+) or the NO HEAT (-)
keypad to increase or decrease the value of the
fifth digit. Refer to Figure 60.
NOTE: The site code can be set from 0 to 65,535.
Figure 60
6. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off. Refer to Figure 61.
Figure 61
C762I
C776I
C826I
C848I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
C827I
C84
8
1
3
2
C827I