Instruction manual

Programming NetMaster
33
511210
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9. Special Vend A Length of Time
“+009”
This option allows the owner to set the length of time
in hours for Special Vend A.
How to Program Special Vend A Length of
Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the LOW TEMP (+) or the NO HEAT (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 42
3. Press the LOW TEMP (+) or the NO HEAT (-)
keypad to scroll through the programmable
options until “+009” appears in the VFD. Refer
to Figure 43.
Figure 43
4. When “+009” appears in the VFD, press the
START (enter) keypad. The current length of
time in hours will appear in the VFD.
5. Press the LOW TEMP (+) or the NO HEAT (-)
keypad to increase or decrease the current length
of time to the desired length of time. Refer to
Figure 44.
Figure 44
6. Press the START (enter) keypad when the correct
length of time appears in the VFD. The next option,
“+010”, will appear in the VFD.
NOTE: To program “+010” (Special Vend A Start
Month), refer to option 10. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the MED TEMP
keypad with one hand, press the LOW TEMP
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to Figure 2.
C762I
C771I
C848I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
C84
8
1
32