Instruction manual

Programming NetMaster

511210

4. Card TopOff Price “+004”

This option allows the owner to set the vend price for

topoffs of drying time when using cards. This vend

price will be displayed in the VFD.

How to Program the Card TopOff Price

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the LOW TEMP (+) or the NO HEAT (-)

keypad until “PrOg” appears in the VFD. Press

the START (enter) keypad and “+001” will

appear in the VFD.

Figure 21

3. Press the LOW TEMP (+) or the NO HEAT (-)

keypad to scroll through the programmable

options until “+004” appears in the VFD. Refer

to Figure 22.

Figure 22

4. When “+004” appears in the VFD, press the

START (enter) keypad. There are five digits in

the Card TopOff Price. The fifth digit will appear

in the VFD and will flash one second on, one

second off. Refer to Figure 23.

NOTE: If vend price is $100.00 or more, the fifth

digit is “1”. If vend price is $99.99 or less, the fifth

digit is “0”.

Figure 23

5. Press the LOW TEMP (+) or the NO HEAT (-)

keypad to increase or decrease the value of the

fifth digit. Refer to Figure 24.

NOTE: The vend price can be set from 1 to 65,535.

Figure 24

C762I

C766I

C826I

C848I

1 Press this pad (+) to scroll forward or increase a value

2 Press this pad (enter) to choose a selected value or

option

3 Press this pad (-) to scroll back or decrease a value

C826I

C84