Instruction manual

Programming NetMaster

511210

3. No Heat Vend Price “+003”

This option allows the owner to set the vend price for a

NO HEAT cycle. This vend price will be displayed in

the VFD when NO HEAT is selected.

How to Program the No Heat Vend Price

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the LOW TEMP (+) or the NO HEAT (-)

keypad until “PrOg” appears in the VFD. Press

the START (enter) keypad and “+001” will

appear in the VFD.

Figure 16

3. Press the LOW TEMP (+) or the NO HEAT (-)

keypad to scroll through the programmable

options until “+003” appears in the VFD. Refer

to Figure 17.

Figure 17

4. When “+003” appears in the VFD, press the

START (enter) keypad. There are five digits in

the No Heat Vend Price. The fifth digit will

appear in the VFD and will flash one second on,

one second off. Refer to Figure 18.

NOTE: If vend price is $100.00 or more, the fifth

digit is “1”. If vend price is $99.99 or less, the fifth

digit is “0”.

Figure 18

5. Press the LOW TEMP (+) or the NO HEAT (-)

keypad to increase or decrease the value of the

fifth digit. Refer to Figure 19.

NOTE: The vend price can be set from 1 to 65,535.

Figure 19

C762I

C765I

C826I

C848I

1 Press this pad (+) to scroll forward or increase a value

2 Press this pad (enter) to choose a selected value or

option

3 Press this pad (-) to scroll back or decrease a value

C826I

C84