Instruction manual

15
511210
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming NetMaster
What Can Be Programmed?
This feature allows the owner to program cycle
parameters, standard vend pricing, special vends, and
other features by using the keypads. The control must
have the Manual Programming Mode enabled, which is
the factory default. This mode can only be turned OFF
and ON by using the Micro-Wand IIIE, the Network,
or a programming card. Refer to this section when
programming NetMaster.
This section offers a detailed description of all 65 options
available for programming.
Each description includes instructions on when and
why the option might be used and, more importantly,
how to program the option.
For more advanced users, a quick reference list of the
options available through the programming mode is
located on this page.
NOTE: The three numbers in the Option column of
the Programmable Options List are what will show
in the VFD display when that option is selected.
Programmable Options Available
# OPTION DESCRIPTION
“+001”
Audio Signal
“+002”
Heat Vend Price
“+003”
No Heat Vend Price
“+004”
Card TopOff Price
“+005”
Site Code #1 Heat Vend Price
“+006”
Site Code #1 No Heat Vend Price
“+007”
Special Vend A On/Off, A Day(s) of Week
“+008”
Special Vend A Start Hour
“+009”
Special Vend A Length of Time
“+010”
Special Vend A Start Month
“+011”
Special Vend A Start Date
“+012”
Special Vend A End Month
“+013”
Special Vend A End Date
“+014”
Special Vend A Site Code #1
“+015”
Special Vend A Heat Price
“+016”
Special Vend A Heat Time Minutes
“+017”
Special Vend A Heat Time Seconds
“+018”
Special Vend A No Heat Price
“+019”
Special Vend A No Heat Time Minutes
“+020”
Special Vend A No Heat Time Seconds
“+021”
Special Vend A Coin #1 TopOff Minutes
“+022”
Special Vend A Coin #1 TopOff Seconds
“+023”
Special Vend A Coin #2 TopOff Minutes
“+024”
Special Vend A Coin #2 TopOff Seconds
“+025”
Special Vend A Auto-Shutdown Enable
“+026”
Coin #1 Amount
“+027”
Coin #2 Amount
“+028”
Start Pulse Value
“+029”
Power Fail Reset
“+030”
Default Cycle
“+031”
Set Real Time Clock Minutes
“+032”
Set Real Time Clock Hours
“+033”
Set Real Time Clock Day
“+034”
Set Real Time Clock Date
“+035”
Set Real Time Clock Month
“+036”
Set Real Time Clock Year
“+037”
Set Real Time Clock Century
“+038”
Heat Cycle Time Minutes
“+039”
Heat Cycle Time Seconds
“+040”
No Heat Cycle Time Minutes
“+041”
No Heat Cycle Time Seconds
“+042”
High Temp Cool Down Time
“+043”
Medium Temp Cool Down Time
“+044”
Low Temp Cool Down Time
“+045”
Coin #1 TopOff Time (Minutes Per Coin)
“+046”
Coin #1 TopOff Time (Seconds Per Coin)
“+047”
Coin #2 TopOff Time (Minutes Per Coin)
“+048”
Coin #2 TopOff Time (Seconds Per Coin)
“+049”
Card TopOff Minutes
“+050”
Card TopOff Seconds
“+051”
Coin #1 Bonus Time (Minutes Per Coin)
“+052”
Coin #1 Bonus Time (Seconds Per Coin)
“+053”
Coin #2 Bonus Time (Minutes Per Coin)
“+054”
Coin #2 Bonus Time (Seconds Per Coin)
“+055”
Configuration #1
“+056”
Configuration #2
“+057”
Configuration #3
“+058”
High Temperature
“+059”
Medium Temperature
“+060”
Low Temperature
“+061”
Lucky Option
“+062”
Smart Card Maximum Value
“+063”
Site Code #1
“+064”
Error Code Programming Parameter
“+065”
Start Pulse Mode
# OPTION DESCRIPTION