Instruction manual

511210
118
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Communications Mode
Infra-red Communications
The Infra-red Communications feature allows the dryer
control to communicate with the Micro-Wand IIIE.
The dryer control can be programmed and have its
data read without using the keypad. It may also be
used to start and stop various diagnostic tests.
When using Infra-red Communications, the control
will go blank and the VFD will display
“-C-” until the communication is complete. The
display will return to the previous mode. If an error
occurs that terminates communication, the VFD will
display “EI:OO” (“OO” represents the error code).
NOTE: The Infra-red Communications option
must be turned on. Refer to option 55 in
Programming NetMaster.
Card Reader Communications
(Card Models Only)
The Card Reader Communications feature allows the
dryer control to communicate with the Card Reader.
The dryer control can be programmed and have its
data read without using the keypad.
Network Communications
The Network Communications feature allows the
dryer control to communicate with the Network. The
dryer control can be programmed and have its data
read without using the keypad.