Instruction manual

117

511210

Power Fail Recovery

The Power Fail Recovery feature allows the cycle status

to be saved in memory in the event of a power failure.

If the power failure lasted less than two (2) seconds,

the cycle will resume without requiring the user to

press the START (enter) keypad to restart.

If the power failure lasted longer than two (2) seconds,

the operation at power up will depend on the setting of

the Power Fail Reset option.

If Power Fail Reset is turned off, the machine will

power up in whatever mode the machine was in when

it powered down. If the machine was running a cycle,

the machine will enter Start mode and the user may

press the START pad to resume the cycle.

If Power Fail Reset is turned on and the power failure

duration was less than the Power Fail Reset time, the

operation will be the same as if Power Fail Reset was

turned off. If the duration of the power failure is

greater than the Power Fail Reset time, the control will

return to the Ready Mode when power is restored.