Instruction manual

511210

114

Sales Floor Feature

The Sales Floor feature is used on a sales floor to

allow the owner to turn on the entire VFD display and

all LEDs. This feature is only available if the Manual

Rapid Advance/Diagnostics Access is enabled.

How to Enter Sales Floor Feature

1. Control must be in Manual Mode to start. Refer

to Entering the Manual Mode.

2. Press the LOW TEMP (+) or the NO HEAT (-)

keypad until “SHOW” appears.

3. Press the START (enter) keypad.

The display will light up.

How to Exit Sales Floor Feature

1. Be sure service door is open.

2. While pressing and holding the MED TEMP

keypad with one hand, press the LOW TEMP

keypad with the other hand.

The display will return to the Ready Mode. Refer to

Figure 2.