Instruction manual

111
511210
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Error Codes
Following is a list of possible error codes. Errors
beginning with “EI” refer to NetMaster Infra-red
communication errors. Errors beginning with “EC”
refer to NetMaster card reader errors. All other errors
refer to electronic control errors.
Display
Information
Description
Cause/
Corrective Action
EI:01 Transmission Failure Communication failure. Re-aim Micro-Wand and try again.
EI:02 Device Timeout Communication failure. Re-aim Micro-Wand and try again.
EI:03 Invalid Command Code Incorrect machine type. Before downloading, ensure data is
for current machine type.
EI:04 Expecting Upload Request Communication failure. Re-aim Micro-Wand and try again.
EI:05 Invalid or Out-of-Range Data Incorrect machine type. Before downloading, ensure data is
for current machine type.
EI:06 Invalid Data Code Incorrect machine type. Before downloading, ensure data is
for current machine type.
EI:07 Error Writing to RTC Control failure. Replace control.
EI:08 Error Writing to EEPROM Control failure. Replace control.
EI:09 CRC-16 Error Communication failure. Re-aim Micro-Wand and try again.
EI:0A Invalid Machine Type Incorrect machine type. Before downloading, ensure data is
for current machine type.
EI:0F Invalid Wakeup or Infra-red
Disabled
Communication failure or infra-red is disabled. Manually
enable infra-red on control or re-aim Micro-Wand and try
again.
EC:00 General Communication Error Communication failure. Try card again.
EC:02 Timeout Error Communication failure. Try card again.
EC:03 Invalid Command Code Incorrect machine type. Before downloading, ensure data is
for current machine type.
EC:05 Invalid or Out-of-Range Data Incorrect machine type. Before downloading, ensure data is
for current machine type.
EC:06 Invalid Data Code Incorrect machine type. Before downloading, ensure data is
for current machine type.
EC:09 Corrupted Data Error Communication error. Try card again.
EC:0A Invalid Machine Type Incorrect machine type. Before downloading, ensure data is
for current machine type.
EC:19 No Card Reader Communication Communication failure. Power down, power up and try
again. If error persists, replace control or card reader.
EC:20 Unreadable Card Faulty card or dirty contact. Clean chip on card or card
reader contacts. Try card again. If error persists, card may
be faulty.
EC:21 Security ID Mismatch Incorrect card. Use card with correct security code.
Table 13 (Continued)