Instruction manual

107

511210

Manual Reset

This feature allows the owner to reset the dryer

control’s programming data to the factory default

settings by pressing a sequence of pads on the control.

For an explanation of the Factory Default Settings,

refer to Default Dryer Settings.

How to Enter Manual Reset

1. Control must be in Manual Mode to start.

Refer to Entering the Manual Mode.

2. Press the LOW TEMP (+) or the NO HEAT (-)

keypad until “rSET” appears. Refer to Figure 231.

Figure 231

3. Press the START (enter) keypad. The control will

display “WAIT” until the programming is

complete. Once the program has been reset, the

control will revert back to the Ready Mode.

DRY569R