Instruction manual

Programming NetMaster
101
511210
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
63. Site Code #1 “+063”
This option allows the owner to program a site code to
correspond with the Site Code #1 pricing. This allows
different pricing for a specific site code.
How to Program Site Code #1
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the LOW TEMP (+) or the NO HEAT (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 218
3. Press the LOW TEMP (+) or the NO HEAT (-)
keypad to scroll through the programmable
options until “+063” appears in the VFD. Refer
to Figure 219.
Figure 219
4. When “+063” appears in the VFD, press the
START (enter) keypad. There are five digits in
Site Code #1. The fifth digit will appear in the
VFD and will flash one second on and one
second off. Refer to Figure 220.
Figure 220
5. Press the LOW TEMP (+) or the NO HEAT (-)
keypad to increase or decrease the value of the
fifth digit. Refer to Figure 221.
Figure 221
C762I
C863I
C826I
C848I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
C826I
C84
8
1
32