Instruction manual

F8237801

Control Identification

Select Cycle Pads

(Refer to Figure 1)

SELECT CYCLE pads are used to select the specific

washer cycle. These pads are numbered 1-9 and allow

the user to select a cycle other than the default cycle

(#5). Refer to Table 1 for keypad definitions. The

SELECT CYCLE keypads are not active after the first

Fill step of the cycle. Pressing the flashing START pad

will confirm the selection and the cycle will begin.

The SELECT CYCLE pads are used in various

combinations for programming cycles, retrieving audit

information, running diagnostic tests, and other

operations. These instructions cover the manual

programming and data retrieval options.

Figure 1

1 SELECT CYCLE pads

2 Display

3 Four 7-Segment Digits

4 STOP pad

5 START (enter) pad

6 LED Light

7 Cycle Indicator Lights

8 LED Status Lights

Keypad Definition

90C

60C

40C

90C PERM PRESS

60C PERM PRESS

40C PERM PRESS

70C PERM PRESS

50C Gentle

30C Gentle

Table 1

CHM1311R