Instruction manual

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Testing Machine and Electronic Control Functions
F8237801
40
Production Test Cycle Quick Reference Chart
Display Test Cycle Step Comments
“S xx” FEC Control Software Version xx is the software version number.
“o xx” Output Board Software Version xx is the software version number.
“Ct 2” Control Type 2 is the control type.
“oPL” Control Type OPL
“USA” or “IntL” Control Type Domestic or International
“drAn” Drain Type
“tEnP” Temp Sensor Step skipped if not equipped with temp sensor.
“HEAt” Heater Step skipped if not heater-equipped.
“rot” Rotation Sensor Step skipped if not Rotation Sensor-equipped.
“L dC” or “L AC” Door Lock Type “L dC” if 24 VDC lock or “L AC” if 240 VAC
unlock solenoid.
“droP” or “drCL” Door Status Door open or closed.
“drUL” or “drLo” Door Lock Status Door will lock.
“8.8.8.8” + all LEDs Display Test All display elements are lit.
“PAxx” where xx = 1 through 12 Keypad Test step Advance after all keypads are pressed.
“A xx” Top Cover Switch Test xx is either “CL” for closed or “oP” for open.
“Cxxx” Machine Type/Size
“drxx” Drive Software Version Number xx is the drive software version number. Design 2
models only.
“dPxx” Drive Parameter Table Version
Number
xx is the drive parameter table version number.
Design 2 models only.
“dt x” Drive Type Value xx is the drive type value. Design 2 models only.
“HFIL” Hot Fill to Low Level All water outputs turned off when Low Level
reached.
“CFIL” Cold Fill to Low Level All water outputs turned off when Low Level
reached.
“bFIL” Warm Fill to Low Level All water outputs turned off when Low Level
reached.
“bFIH” Warm Fill to High Level All water outputs turned off when High Level
reached.
“S1” for supply or “C2Co
”
for compartment
Supply #1 or Compartment
#2 Cold Fill
“S2” for supply or “C2Ho”
for compartment
Supply #2 or Compartment
#2 Hot Fill
“S3” for supply or “C3Co”
for compartment
Supply #3 or Compartment
#3 Cold Fill
“S4” for supply or “C4Ho”
for compartment
Supply #4 or Compartment
#4 Hot Fill
Table 13 (continued)