Instruction manual

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F8237801
36
Manual Reset
This feature allows the owner to reset the machine
control’s programming data to the factory default
settings by pressing a sequence of pads on the control.
How to Enter Manual Reset
1. Control must be in Manual Mode to start.
Refer to Entering the Manual Mode.
2. Press the #3 ( ) or the #6 ( ) keypad until
“rSEt” appears.
Press the START (enter) keypad. The control will be
blank until the programming is complete. Once the
program has been reset, the control will display the
next Manual Mode option, “dIAg”.
>
<