Instruction manual

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Entering the Manual Mode
F8237801
12
Figure 3
>
>
To enter a programming
option, press the START (enter)
keypad. To exit, press the
#5 ( ) keypad.
>
CHM1337R
Press the #3 ( ) or the #6 ( )
keypad to scroll through
the Manual Mode
options.
Manual Mode : Enter by opening
top cover. Then press #4 and #1
keypads pads at same time.
“rAPd”
Rapid Advance
“Prog”
Manual
Programming
“AUdt”
Manual Read
Audit
“rSEt”
Manual Reset
“dIAg”
Diagnostic
Tests
Press the START (enter) keypad to
begin Rapid Advance cycle and
to advance through cycle steps.
Press the START (enter) keypad to
enter Manual Programming.
Refer to Manual
Programming flowchart.
“CyC”
Total machine cycles
Press the
START keypad.
Press the
START (enter) keypad
to reset control.
Press the START (enter) keypad to
enter Diagnostic Tests. Refer to
Diagnostic Tests flowchart.
Press the START (enter)
keypad to read audit.
“rCyC”
Total rapid
advance cycles
Press the START (enter)
keypad to read audit.
CHM1337R