Service manual

F238000

Section 4 Service Procedures

To reduce the risk of electrical shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer-extractor before servicing.

• Never start the washer-extractor with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer-extractor is properly grounded.

W171

WARNING

38. LOADING DOOR

a. Support outer front panel while removing six

screws holding panel to front of washer-

extractor, refer to Figure 17.

b. Remove outer front panel and set aside.

c. Remove four nuts holding loading door hinge

to shell front, refer to Figure 18.

d. Remove loading door and hinge together.

e. Remove loading door shims.

NOTE: When replacing door hinge, use same

number of shims as existed prior to removal.

Figure 18

B017SE1A

DOOR

SHIMS

LOADING DOOR

HINGE