Service manual

12
F238000
Section 3 Troubleshooting
To reduce the risk of electrical shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer-extractor before servicing.
• Never start the washer-extractor with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer-extractor is properly grounded.
W171
WARNING
14. EXCESSIVE VIBRATION AND/OR NOISE DURING SPIN
15. EXCESSIVE CYCLE TIME
POSSIBLE CAUSE TO CORRECT
Inadequate foundation or loosened bolt. • Tighten bolts, be sure the foundation is adequate for the
machine.
POSSIBLE CAUSE TO CORRECT
Insufficient water supply to machine. • Water supply lines must be of adequate size.
• Water pressure is too low — increase if possible.
Clogged inlet valve strainer. • Check inlet valve strainer and clean as required.
Clogged inlet hose strainer. • Check inlet hose strainer and clean as required.