Operating instructions

Maintenance

F232134

Quarterly

NOTE: Disconnect power to the machine before

performing the quarterly maintenance procedures.

1. Tighten door hinges and fasteners, if necessary.

2. Tighten anchor bolts, if necessary.

3. Verify that the drain motor shield is in place and

secure.

4. Check all painted surfaces for exposed metal.

(Matching paint is available from the

manufacturer.)

● If exposed metal is showing, paint with primer

or solvent-based paint.

● If rust appears, remove it with sandpaper or by

chemical means. Then paint with primer or

solvent-based paint.

5. Clean steam filter, where applicable. Refer to

Figure 12.

a. Turn off steam supply and allow time for the

valve to cool.

b. Unscrew cap.

c. Remove filter element and clean.

d. Replace filter element and cap.

Figure 12

H042I

1 Cap

2 Filter Element

H042I