Operating instructions

Maintenance
F232134
14
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Monthly
NOTE: Disconnect power to the machine at its
source before performing the monthly maintenance
procedures.
1. Use the following procedures to determine if
V-belt(s) require replacement or adjustment. Call
a qualified service technician in either case.
a. Check V-belt(s) for uneven wear and frayed
edges.
b. For groove-pulley drive systems, verify
alignment by placing a straightedge across
both pulley faces. The straightedge should
make contact with the pulleys in four places.
Refer to Figure 11.
Figure 11
2. Remove back panel. Check overflow hose and
drain hose for leaks.
3. Unlock the hinged lid and check the supply
dispenser hoses and hose connections.
4. Clean inlet hose filter screens:
a. Turn water off and allow valve to cool, if
necessary.
b. Unscrew inlet hose and remove filter screen.
c. Clean with soapy water and reinstall. Replace
if worn or damaged.
5. Tighten motor mounting bolt locknuts and
bearing bolt locknuts, if necessary.
6. Use compressed air to clean lint from motor.
7. Clean interior of machine, both basket and shell,
by wiping with a water-soaked sponge or cloth.
8. Use compressed air to ensure that all electrical
components are free of moisture and dust.
H040I
1 Motor
2 Motor Pulley
3 Straightedge
4 Basket Pulley
HI
1
2
34